Boats For Sale - Scroll down to see the Ads
To post your Cal 25 for sale please do the following:
- Include a brief description of the boat, condition of hull and sails.
- Remember to INCLUDE the City/body of water where the Cal 25 is located.
- If you like, e-mail a small (less than 75K file size) picture with the ad.
- E-mail your ad to webmaster@cal25.com
- Inform your buyer about Cal25.com, we want to keep your boat racing!
- Let us know when you sell your boat or item so the ad can be removed.
- The management at Cal25.com cut-n-pastes whatever the Cal 25 owner/seller sends us. We don’t verify the information in their ad and are not responsible for what someone sends us.
NICE Cal 25 for sale
Everything on the outside of the boat has been restored 4 years ago. All new paint, top and bottom. New windows and rubrail. New class legal racing sails from Ullman (kevlar genoa) also have a spinnaker but don't have it fully rigged for a spinnaker yet. New standing and race ready running rigging. All new deck hardware (winches, blocks, and cleats) with all lines leading aft to cockpit. New custom dual axle galvanized trailer (never been in the water). New 4 hp 4 stroke mercury outboard. Inboard 10 gal fuel tank with fill and vent outside. I also have a brand new tiller autopilot for it that has never been out of the box. I have over $18,000 invested in this boat and am ready
to let it go for market price of Boat has been stored in covered dry storage since the restoration 4 years ago. I did not get to finish the interior but much of it has been done as well. All it needs is to have the interior finished and it will be the nicest Cal 25 on the coast.
Email me at bobarthur@mac.com or call Bob at 949.702.1232 for more details
$4,500
Rainshadow 1966 Cal 25 #225 Sank in Chicago Monroe Harbor Wind Storm 10/19/11
Reclaimed Parts/ Salvaged.
-Multiply Mahogany Beam and Bulkheads Intact. An often needed repair on the Cal 25. I could send you intact Okume Plywood Main Bulkheads and Super Mahagony Beam.
...I replaced the upper deck and most of the interior of this cal. Broken on the rocks...the main bulkhead remained tabbed and stout. My loss is your gain.
-Rudder.
-Misc. deck fittings and blocks. Mast boot with under block plate from Seals Spars.
-Chain Plates
The boat is scheduled for crushing soon. I will salvage all that I can. Let me know what you might need.
Quentin Arnold
Chicago
repairviolin@gmail.com 312.671.0230
I had rebuilt the backbone of the boat
| 1968 Cal 25ft. sailboat. |
| $1,500.00 or best offer. Make me an offer! Need to sell due to relocation. |
30 July 2011
1969 CAL 25, VERY GOOD SHAPE OVERALL. HULL CLEAN, 5 SAILS-GOOD, ALL RIGGING GOOD, INTERIOR IS VERY NICE AND CLEAN. All necessary CG equip. Ready to sail. 15ho Merc o/b, all cushions/seats reupholstered, propane grill, 2 deep cycle bats w/charger, heat and a/c system (Mermaid), head/porto-potty, lots of stowage, much more. Boat is docked on Lake Mead near Las Vegas. $2900.00
Jim 702-606-8173 marcijim@hotmail.com
Parted out a Cal 25 and have:
Mast, Boom, Rudder, Standing Rigging, Main Sail and Genoa,
Alcohol pressure stove, sink, head, water tank, cockpit cushions.
Everything is original equipment on the boat,
except that the sails and cockpit cushions were replaced somewhere in the 90’s
and have been mostly in storage since then.
All parts are located in Mooresville, NC and will be sold for fair prices.
Please email Matt with your interests/offers: piccolo_mondo@adelphia.net
Sailboat Equipment Package - $1,240
Some of the hardware (winches, jib blocks, mainsail blocks, etc.) was removed from a Cal 25. This equipment shows normal wear and tear but is functional and appears to be in generally good condition. The three sets of Harkin blocks (picture 1, left, front) and the two rope stops (picture #2) were purchased with the intent of running the halyards aft, but the project was never completed. These components are, therefore, like new.
Blocks & Turnbuckles
Two (2) Harkin 2¼" blocks
Two (2) Harkin cheek blocks; sheave dia. 1⅛"
Two (2) Harkin 1¾" blocks
Two (2) turnbuckles, 5/16" pin size
Two (2) turnbuckles, ¼" pin size
Two (2) lifeline turnbuckles, ¼" pin size
One (1) Schaefer stand-up swivel block with cleat for mainsheet; sheave diameter is 1½", height is 5¼"
One (1) Schaefer block/cleat assembly; sheave dia. is 1¼"
One (1) Schaefer stand-up spring-loaded swivel block; sheave diameter is 1⅞", height is 4½"
Two (2) spring-loaded stainless steel blocks on slides; for 1" track; sheave dia. is 31 mm height is 3-6/16"
Two (2) spring-loaded stainless steel blocks on slides; for 1" track; sheave dia. is 1¾", height: 4-7/16"
One (1) Schaefer double block; sheave dia. 1-11/16; for use with mainsheet, vang, or other multipart systems
One (1) Schaefer spring-loaded block on slide for 1" track; sheave dia. is 1-7/16"
Other equipment and components
Ritchie Model B-51 bracket mount compass (with waterproof VHF extension speaker and small emergency replacement antenna)
Newberg tiller lock
Two (2) pelican hooks
Two (2) rope guides
One (1) deck fitting (goes with boom vang)
One (1) Schaefer cheek block
One (1) Large spring-clasp clamp
Four (4) 7½" cleats
Four (4) 4" cleats
Two (2) 5" cleats
One (1) metal air horn
Two (2) Barient 10 chrome winches; drum diameter is 2-11/16"; 6-bolt 3¾" diameter brass mounting base. Winches come with handle.
One (1) Barient 9 chrome winch with removable mast accommodation base plate; drum diameter is 2¼"
Manual blow horn
Waterproof VHF Extension Speaker (never opened)
Horizon Eclipse+ VHF Marine Radio with mounting bracket
Schaefer boom vang with ⅜" line and deck fitting (Current equivalent is Schaefer Model 35-03 priced at $364.99—see picture #2, left foreground)
Battery selector switch
Two (2) Spinlock cleats for rope (rope stops) 8–12 mm, (5/16–7/16 inches)
Loos rigging tension tester
Box of Stainless steel bolts, nuts, washers, and screws (4¼ pounds)
Electric bilge pump, 500 gph. (never installed; like new)
Two (2) teak handles 13" OD/7"ID (new, never used/mounted)
Sun Company sailing clinometer (new, still in packaging)
Nylon webbing lifting sling. 19 k min. net capacity
One (1) 3-step side mounting ladder
Personal safety harness
Two (2) small d/c fans
Two (2) “De-fender" heavy-duty inflatable dock bumper, 2' long, 18" circum. Comes with rope and clamps.
SOS Flag by Jim-Buoy®
A box of miscellaneous items (not pictured) includes:
Hand-held wind meter
Two (2) “Snapper" line holders (new)
Polyester whipping twine (blue and white)
“Boat Saver" brand fender hangers
Emergency boat plugs (2 sizes)
Sumlog speedometer and mile logger (needs cable; may or may not be usable)
Four (4) emergency whistles (for life vests)
Clevis pins (wide assortment)
Two (2) safety hasps
Reef maker sail ties
Sail tape
Two (2) packages of set screws
Sail track stop
Cal 25 Sails from a 1976 boat
JIB SAIL (100%) specifically made for a Cal25 in the late 1990s. Challenge-brand Dacron, 6.53 oz. Excellent condition; “one step shy of new” is the way a sail maker appraised the sail. Made for 30' mast. Luff is 29'0"; foot is 10'5". $750
GENOA (about 160%). Murphy & Nye. 5.5 oz Dacron by Bainbridge. 1975 vintage but still has life. Luff 29'4"; foot\ 16'0". $250
GENOA (approx. 120%) Dacron, 1975 vintage. Sail is clean but washing has depleted some of the resin, reducing stability. Still serviceable, however. Luff 27'0"; foot 13'0". $100
STORM JIB: 1963 vintage; battens are sewn in. Modified. Luff 20'4"; foot 7'0". $100
Buy the entire package of four sails for $900
Each sail is in the nylon bag provided by the manufacturer.
Contact Daniel - 630.539.6780 (Schaumburg, IL) or email: 2josjems@joltmail.com
*****************************************
Cal 25, 1965, Good Condition and Sail-able now, Classic Hull; Responsive, sturdy, comfortable, equipped. VERY Bay worthy and Coast Guard requirements met.
Registration - 2011
Boat trailer is unavailable through seller.
This boat has some cosmetic flaws such as peeling paint in the V-berth, scuffs and chips, etc., but was built with quality woods and materials; I have heard that the hulls were constructed much thicker in the earlier days of fiberglass usage, when this boat was built. The hull and painted surfaces are in good shape but in need of polish and some superficial cracks filled. Standing Rigging replaced recently, running in good shape.
Asking price is $2,900.00, best offer will be seriously considered.
This boat is listed on craigslist for the San Francisco Bay Area and is berthed in Alameda.
Please see it at:
http://sfbay.craigslist.org/eby/boa/2142721506.html
Thank you for looking.
Frank H
*****************************************
PARTS
Mast, Cal Custom Spar number BF0185 and Hood Furler
Rudder
Bow pulpit
Stern pulpit (two peices)
Safety lines and stanchions
Head Tank
Contact Tom Ross 262-949-2989 or tomsellshouses@aol.com I will forward detailed pictures upon request.
Located in Long Beach, Ca
1. Complete fiberglass pop top $1.500.00
2. Stern door $300.00
3. Mast and boom $????
3. Other misellaneous parts. Call for prices
Steve @562-434-2789 or: sbutler8530@yahoo.com
***************
Parts from Cal 25 (1968) Hull #634
Rudder (located in Indianapolis)
Stanchions, Winches Lines, halyards, anchors
Make offer all sold at reasonable prices.
Chris H.
chrishindy@hotmail.com
Raleigh, NC
********************
1974 Cal 25 Parts for sale Huntington (Long Island) NY
New Main
New Spinnaker
Used main, 2 jibs
New ports from Mark Plastics, cost me $1600. Never made it out of the crate.
Pair of Barient winches.
Cabin/Galley table
Chain-plates
Mast
Boom
Lots of teak trim
New Seals Spars rub rail still in box
I also have new Seals Spars spreaders and brackets
Make me offers.
Ben bkoche@hotmail.com
Like New Custom Cal 25 Standing Rigging
One year old
Includes forestay, inner shrouds, and split aft-stay (no outers sorry)
All Norseman mechanical fittings
All cables are sized one gauge larger than stock for cruising
Located in Newport Beach California
$500.00
please email Kelly: greenkangaroo02@hotmail.com
